Seagull Models Funfly 3D Spécifications télécharger pdf (Page 12)

SEAGULL FUNFLY 3D. Instruction Manual.

3) Use a drill to drill the four holes in the engine

mount rails.

4) On the fire wall has the location for the

throttle pusshrod tube (pre-drill).

2mm.

Pushrod tube hole.

2) Use a pin drill and 2mm drill bit to drill a

small indentation in the mount for the engine

mounting screw.

MOUNTING THE ENGINE.

1) Position the engine with the drive washer

(110mm) forward of the firewall as shown.

110mm.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Seagull Models Funfly 3D Spécifications Page 12